PUBLICATIONS

Journals

  • 154

    Electrodeposited CuxFe3-xSe4 nanoheterostructure arrays on carbon cloth as a binder-free faradaic negative electrode for asymmetric supercapacitors

    Abstract

    Extensive research is being conducted worldwide to design and develop novel high-performance electrodes for supercapacitors (SCs) being a viable alternative to fossil fuels, dealing with the challenges of looming energy crisis and environmental issues globally. Herein, the design and synthesis of novel binder-free CuxFe3-xSe4@carbon cloth (CFS@CC) nanoheterostructure array electrode materials with tunable copper (Cu)/iron (Fe) stoichiometric ratios are demonstrated via a one-step room-temperature chronoamperometric (potentiostatic) electrodeposition process and their electrochemical characteristics as a promising faradaic negative electrode for SCs are explored systematically. The effect of Cu/Fe stoichiometric ratios on the morphological property and electrochemical performance of different CFS@CC array electrodes is thoroughly investigated to realize the sufficiently reaping synergistic benefits of Cu and Fe ions. Moreover, following a kinetic matching strategy, the optimized CFS@CC arrays as a negative electrode are assembled with the faradaic Ni3Se2/NiSe2@CC nanosheet arrays as a positive electrode to fabricate a novel asymmetric supercapacitor (ASC) device (Ni3Se2/NiSe2@CC//CFS-1.5@CC) which is operable in a large and stable potential window of 1.6 V and exhibits a high energy density of 84.8 Wh kg−1 at a power density of 664 W kg−1 with an excellent long-term electrochemical cycling stability. Some real-life applications of the as-fabricated ASC device are displayed to ensure its practicality.

    Graphical abstract

    Image 1
  • 153

    Multiphase Cu-Ni selenide nanocomposite electrode materials for high-performance hybrid supercapacitors

    Abstract

    Metal vanadates/selenides are an advantageous electrode candidate for energy storage and conversion devices, owing to their low cost, good structural stability, high electroactivity, and abundance. Herein, firstly, copper oxide/nickel-vanadium oxide (CuO/Ni3V2O8) (CuO/NVO) nanosheets were rationally prepared via a facile hydrothermal method, followed by calcination process. Furthermore, the evolution of morphology was systematically examined at different growth times of 7, 9, and 11 h. Among the prepared samples, the CuO/NVO electrode synthesized for 9 h (CuO/NVO-9 h) revealed a high areal capacity (CA) value of 183.1 µAh cm−2 (specific capacity (CS) value of 89 mAh g−1). Additionally, to boost the electrochemical performance of the CuO/NVO-9 h electrode, selenium (Se) was introduced in the N2 gas atmosphere. The resultant Cu6.0Se5.22/Ni2.0V4.0Se8.0 (CuSe/NiVSe) electrode with mixed morphology exhibited an improved CA value of 236.1 µAh cm−2 (CS value of 94.4 mAh g−1) with good cycling retention of 103.8%. Moreover, the constructed CuSe/NiVSe(+)//AC(−) hybrid supercapacitor (HSC) device delivered a good energy density value of 0.173 mWh cm−2 (40.7 Wh kg−1) at a power density value of 16.1 mW cm−2 (3040.4 W kg−1). Finally, the real-time application of the HSC device was also tested by energizing various electronic gadgets.

    Graphical abstract

  • 152

    Surface-engineered binder-free PEDOT shielded nickel magnesium selenide nanosheet arrays electrode for ultralong-life flexible quasi-solid-state hybrid supercapacitors

    Abstract

    Together with the development of high-performance advanced electronics, flexible supercapacitors (SCs) with tailored nanostructures have great attraction. Electrochemically deposited nanosheet arrays of nickel magnesium selenide (NixMg3-xSe4, NMgS) with high capacitance provide high potentials as a positive electrode in flexible SCs. To further enhance their electrochemical properties and long-term cycling stability, a promising strategy of surface engineering with conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) is proposed. The present work proposes the construction of PEDOT shielded NMgS (P@NMgS-2) on a flexible carbon cloth substrate via a hierarchical electrodeposition technique. Benefitting from the synergistic effect, the P@NMgS-2 exhibits an excellent areal capacitance value of 1440 mF cm−2 at 4 mA cm−2. A novel shape-adaptable polymer gel electrolyte-assisted flexible quasi-solid-state hybrid SC (FQHSC) device constructed with P@NMgS-2 as a positive electrode and activated carbon as a negative electrode demonstrates the maximum power and energy density values of 14.13 mW cm2 and 0.18 mWh cm−2, respectively, followed by outstanding cycling stability (∼100% capacitance retention over 50,000 cycles). Furthermore, the FQHSC device successfully powered electronic devices with no serious degradation upon bending and twisting for wearable electronic applications.

  • 151

    Multimode Consecutively Connected Piston-Type Cylindrical Triboelectric Nanogenerators for Rotational Energy Harvesting and Sensing Application

    Abstract

    A 3D-printed multicoupled piston-type cylindrical triboelectric nanogenerator (MPC-TENG) that utilizes contact-separation and lateral-sliding operational modes to harvest rotational motion and convert it into electricity was proposed. The electrical performances of the fabricated four similar piston-type cylindrical TENGs (PC-TENGs) were systematically investigated. TENGs in general produce electricity in an alternating-signal form which may not be used to directly power electronic devices. Therefore, all the individual PC-TENGs were connected with a simple external filter circuit to obtain direct current (DC) electrical output, and further, they were parallelly connected to increase the overall electrical output from the MPC-TENG. The MPC-TENG consists of four PC-TENGs and produces a DC electrical output of ~40 V and ~12.5 μA at 380 rpm. Furthermore, the MPC-TENG was attached to wind cups to harvest wind energy and a Pilton wheel to harvest hydrokinetic energy, respectively. The harvested energy was stored in energy storage devices to power various small-scale electronic gadgets. Furthermore, a real-time self-sustaining alarm combined with the MPC-TENG was demonstrated to detect unauthorized human/wild animal entry into a protected region. This work also shows that the DC electrical signals from the proposed MPC-TENG can be further increased by combining more PC-TENG devices.

  • 150

    Single-Electrode Triboelectric Nanogenerators Based on Ionic Conductive Hydrogel for Mechanical Energy Harvester and Smart Touch Sensor Applications

    Abstract

    Recent advancements in wearable electronic technology demand advanced power sources to be flexible, deformable, durable, and sustainable. An ionic-solution-modified conductive hydrogel-based triboelectric nanogenerator (TENG) has advantages in wearable devices. However, fabricating a conductive hydrogel with better mechanical and electrical properties is still a challenge. Herein, a simple approach is developed to insert ion-rich pores inside the hydrogel, followed by ionic solution soaking. The suggested ionic conductive hydrogel is obtained by cross-linking the polyvinyl alcohol (PVA) hydrogel and carboxymethyl cellulose sodium salt (CMC), followed by soaking in the ionic solution. Furthermore, a flexible and shape-adaptable single-electrode TENG (S-TENG) is fabricated by combinations of ionic-solution-modified dual-cross-linked CMC/PVA hydrogel and silicone rubber. Additionally, the effects of the CMC concentration, type of ionic solution, and concentration of optimized ionic solutions on the hydrogel properties and S-TENG output performance are studied systematically. The well-dispersed CMC- and PVA-based hydrogel provides ion-rich pores with high ion migration, leading to enhanced conductivity. The fabricated S-TENG delivers maximum output performance in terms of voltage, current, and charge density of ∼584 V, 25 μA, and 120 μC/m2, respectively. The rectified S-TENG-generated energy is used to charge capacitors and to power a portable electronic display. In addition to energy harvesting, the S-TENG is successfully demonstrated as a touch sensor that can automatically control the light and the speaker based on human motions. This investigation provides a deep insight into the influence of the hydrogel on the device performance and gives a guidance for designing and fabrication of highly flexible and stretchable TENGs.

    This publication is licensed under the terms of your institutional subscription. Request reuse permissions.

  • 149

    Triboelectric Film with Electrochemical Surface Modification for Multiple Mechanical Energy Harvesting with High Storage Efficiency and Sensing Applications

    Abstract

    Triboelectric nanogenerators (TENGs) are a key technology that can harvest mechanical energy available from the surrounding nature into electricity based on the triboelectrification and electrostatic induction mechanism. Rotational energy is one of the abundantly available renewable energy sources that can efficiently be harvested into electricity. It is also well-known that the surface area of the triboelectric film plays an important role in electric output generation. Herein, we electrochemically modified the surface of a copper film by creating microarchitecture and employed it in the fabrication of a rotational TENG (R-TENG). The fabricated R-TENG generated an electrical output of ∼180 V and ∼11 μA at 100 rotations per minute. Thereafter, the generated electrical output was efficiently stored by fabricating and combining a circuit with the R-TENG. Finally, the R-TENG was used to harvest various rotational energies, and the produced electric output was used to power portable electronics. The R-TENG combined with the circuit also functions as a wind speed sensor.

    This publication is licensed under the terms of your institutional subscription. Request reuse permissions.

  • 148

    Carbon-Shielded Selenium-Rich Trimetallic Selenides as Advanced Electrode Material for Durable Li-Ion Batteries and Supercapacitors

    Abstract

    In order to achieve a sustainable future, researchers must continue to research improved electrode materials. Considering the high electronic conductivity, versatile redox activity, and enhanced energy storage performance, nanostructures have been employed as a novel electrode material for high-performance lithium-ion batteries (LIBs) and supercapacitors. Herein, carbon-coated selenium-rich trimetallic selenide (Cu2NiSnSe4@C) nanoparticles (NPs) as an efficient electrode material in energy storage devices are prepared. The prepared core-shell Cu2NiSnSe4@C NPs electrode is employed as an anode material for LIBs, which demonstrated a high reversible specific capacity of 988.46 mA h g−1 over 100 cycles at 0.1 A g−1 with good rate capability. Additionally, the core-shell Cu2NiSnSe4@C NPs electrode exhibited an outstanding capacity of 202.5 mA h g−1 at 5 A g−1 even after 10 000 cycles. Exploiting the synergistic characteristics, the core-shell Cu2NiSnSe4@C NPs material is also investigated as a battery-type electrode for hybrid supercapacitors. The assembled hybrid supercapacitor with Cu2NiSnSe4@C NPs and activated carbon showed excellent rate capability including high power (5597.77 W kg−1) and energy (64.26 Wh kg−1) densities. Considering the simple synthesis and enhanced energy storage properties, carbon-coated selenium-rich trimetallic selenide can be used as a durable electrode material for practical energy storage devices.

  • 147

    FeV LDH Coated on Sandpaper as an Electrode Material for High-Performance Flexible Energy Storage Devices

    Abstract

    Recently, considerable research efforts to achieve advanced design of promising electroactive materials as well as unique structures in supercapacitor electrodes have been explored for high-performance energy storage systems. We suggest the development of novel electroactive materials with an enlarged surface area for sandpaper materials. Based on the inherent micro-structured morphologies of the sandpaper substrate, nano-structured Fe-V electroactive material can be coated on it by facile electrochemical deposition technique. A hierarchically designed electroactive surface is covered with FeV-layered double hydroxide (LDH) nano-flakes on Ni-sputtered sandpaper as a unique structural and compositional material. The successful growth of FeV-LDH is clearly revealed by surface analysis techniques. Further, electrochemical studies of the suggested electrodes are carried out to optimize the Fe-V composition as well as the grit number of the sandpaper substrate. Herein, optimized Fe0.75V0.25 LDHs coated on #15000 grit Ni-sputtered sandpaper are developed as advanced battery-type electrodes. Finally, along with the negative electrode of activated carbon and the FeV-LDH electrode, it is utilized for hybrid supercapacitor (HSC) assembly. The fabricated flexible HSC device indicates high energy and power density by showing excellent rate capability. This study is a remarkable approach to improving the electrochemical performance of energy storage devices using facile synthesis.
  • 146

    Rational construction of porous marigold flower-like nickel molybdenum phosphates via ion exchange for high-performance long-lasting hybrid supercapacitors

    Abstract

    Recently, many development efforts towards energy storage materials by researchers have resulted in the design and fabrication of various electrode materials for efficient energy storage applications. Transition metal phosphates have attracted much interest among the reported materials due to their superior properties. Herein, we report urea-based nickel molybdenum phosphate nanopetals embedded microspheres (UNMP NPs@MSs) with a morphology closely resembling a marigold flower via an ion exchange synthesis technique. The addition of phosphorus leads to the procedural enhancement of transition metal oxides. Furthermore, this work also specifies the necessity of a suitable morphology to push the working material to its maximum limit. In a three-electrode configuration, the UNMP NPs@MSs-coated nickel foam (UNMP NPs@MSs/NF) electrode delivers an areal capacity value of 166.6 μAh cm−2, accompanied by a capacity retention of 99.5% after 50 000 cycles. Additionally, the hybrid supercapacitor (HSC) device is assembled with UNMP NPs@MSs/NF as a positive electrode and activated carbon as a negative electrode. The HSC device exhibits an areal capacitance value of 453.95 mF cm−2 with energy and power density values of 34.34 Wh kg−1 and 5106.38 W kg−1, respectively. Remarkably, the as-assembled HSC shows outstanding long-term cycling stability with 109% retention even after the completion of 100 000 cycles. Finally, the fabricated HSC device is employed to power electronic components to verify its real-time utilization and the results are reported.

    Graphical abstract: Rational construction of porous marigold flower-like nickel molybdenum phosphates via ion exchange for high-performance long-lasting hybrid supercapacitors
  • 145

    Oxygenated copper vanadium selenide composite nanostructures as a cathode material for zinc-ion batteries with high stability up to 10 000 cycles

    Abstract

    The development of aqueous zinc-ion batteries (AZiBs) towards practical implementations is hampered by unsuitable host cathode materials. Herein, we reported a high-capacity, stable, and long-cycle-life (10 000 cycles) oxygenated copper vanadium selenide composite material (Cu0.59V2O5/Cu0.828V2O5@Cu1.8Se1/Cu3Se2, denoted as O–CuVSe) as a cathode for AZiBs. The newly constructed O–CuVSe composite cathode can be operated in the wide potential window of 0.4–2.0 V, exhibiting a high specific capacity of 154 mA h g−1 at 0.2 A g−1 over 100 cycles. Interestingly, the O–CuVSe composite cathode delivered excellent specific capacities of 117 and 101.4 mA h g−1 over 1000 cycles at 1 and 2 A g−1, respectively. Even at a high current density of 5 A g−1, the cathode delivered a high reversible capacity of 74.5 mA h g−1 over an ultra-long cycling life of 10 000 cycles with no obvious capacity fading. Apart from this, the cathode exhibited excellent rate capability at different current densities. The superior electrochemical properties originate from the synergistic effects between the oxygen vacancy engineering and interlayer doping of Cu ions to increase the structural stability during the cycling, enhancing the electron/ion transport kinetics. Moreover, the Zn2+ storage mechanism in the Zn/O–CuVSe aqueous rechargeable battery was explored. This study provides a new opportunity for the fabrication of different kinds of a new class of cathode materials for high-voltage and high-capacity AZiBs and other energy storage devices.

    Graphical abstract: Oxygenated copper vanadium selenide composite nanostructures as a cathode material for zinc-ion batteries with high stability up to 10 000 cycles